ZENNER Flush mounting block 2"
The new ZENNER Block 2" with its small dimensions is currently the smallest assembly block for water meters in the world.
Two one-piece connecting interface bodies, with integrated shut-off valves are embedded in the heat and sound insulation casing.
Meter and valves can be assembled simply in a single process without prior alignment. The mounting block is thus suitable for assembly in masonry, rear walls and sides as well as for wall-mounted installation. The ZENNER Block 2″ is especially suited to confined installation situations. A one-piece rosette encloses both water meters and the water shut-off valves. The mounting block can be quickly separated from a duo-block to a mono-block by means of a saw groove.
All materials which are used in the drinking water section comply with the required standards, guidelines and the current German drinking water approval (Recommendation from Federal Environment Office of suitable drinking water hygienic metal materials, KTW guideline and DVGW worksheet W270).
Note:
The pre-assembled plastic sealing caps must not be used for more than 2 years under pressure. For long-term use or latest after 2 years, the plastic sealing caps should be replaced against brass caps.
Product images
Information
ZENNER Flush mounting block 2"
Downloads
Performance characteristics in overview
- Water meter block for flush-mounted installation
- Smallest installation dimensions
- One-piece brass flush-mounting units with integrated shut-off valves
- Material of the connection interface available in brass or red brass
- No sealing point within the block
- Installation in vertical pipes only
- For the inclusion of 2” flush mount meter with interface “IST”
- One-piece rosette Duo (one-piece rosette for covering both counters and shut-off valves together)
- One-piece rosette Mono (one-piece rosette for covers one counters and one shut-off valve if the block is ben separated)
- Both rosette types are sold separately
Other ZENNER products
Discover other interesting products in our product range.
Water Meters ETKD/ETWDWater Meters ETKD/ETWD
Water Meter EKTD/ETWD is a Single-Jet Meter for cold and hot water. The ETKD is equipped with a counter with a shielded magnetic coupling which delivers virtually perfect results ...
Universal meter M22 for installation lengths from 110 to 190 mm